Marzhauser TANGO controller
|
Summary: |
Interfaces with Märzhäuser TANGO controllers and associated hardware |
|
Author: |
Interface instructions: Falk Dettmar |
|
License: |
GNU lesser |
|
Platforms: |
All (uses serial interface) |
|
Devices: |
Controller, Shutter, Lamps, XY Stage, Z Axis, and ADC |
The Märzhäuser TANGO family of controllers can be controlled now using the native Marzhauser adapter. It is tested using the Tango-DT with USB interface on Windows 7. The Tango with PCI and PCIe connector were also tested successfully on Windows 7. To configure Micro-Manager to work with the Märzhäuser Tango you need to do the following:
|
1. |
Please refer the CD shipped with the Tango and follow the usual installation procedure. |
|
2. |
Use the MM hardware configuration wizard for selection of required Märzhäuser components. |
See also: Märzhäuser Corvus device adapter.
–Dettmar 24:24, 19 February 2010 (PDT)