WSB PiezoDrive CAN, WSB ZPiezo CAN and WSB ZPiezo adapters
|
Summary: |
Interfaces Wienecke & Sinske GmbH piezo stage controllers for x,y and z axes |
|
Author: |
|
|
License: |
BSD |
|
Platforms: |
All Platforms (serial port) |
|
Devices: |
|
WSB PiezoDrive CAN
This adapter interfaces piezo xy stages driven by Wienecke &
Sinske WSB PiezoDrive CAN controller. It
communicates with the controller through the serial port so that no
further software is needed.
If the stage is connected via CAN to a motorized Zeiss microscope, you
also may use the ZeissCAN29 motorized microscope device to control those
stages.
Special properties of the XYStage:
|
Velocity (micron/s) |
Sets the maximum speed of the XY stage |
|
Acceleration (micron/s^2) |
Sets the acceleration of the XY stage |
WSB ZPiezo CAN / WSB ZPiezo
These adapters interface piezo z stages driven by Wienecke & Sinske. Please note that there are 2 types of WSB ZPiezo controllers using different protocols: select either WSB ZPiezo or WSB ZPiezo CAN according to the imprint. Communication with the controller is using the serial port so that no further software is needed.
COM Settings:
|
WSB PiezoDrive CAN |
WSB ZPiezo CAN |
WSB ZPiezo |
|
|
Answer Timeout |
Long enough for stage to complete moves |
||
|
Baud Rate |
57600 |
57600 (for PartNo 432339) |
115200 |
|
DTR |
Disable |
||
|
Data Bits |
8 |
||
|
Delay Between Chars Ms |
0 |
||
|
Handshaking |
Off |
||
|
Parity |
None |
||
|
Stop Bits |
1 |
||