top bar

Marzhauser

Marzhauser TANGO controller

Summary:Interfaces with Märzhäuser TANGO controllers and associated hardware
Author:Interface instructions: Falk Dettmar
License:GNU lesser
Platforms:All (uses serial interface)
Devices:Controller, Shutter, Lamps, XY Stage, Z Axis, and ADC

The Märzhäuser TANGO family of controllers can be controlled now using the native Marzhauser adapter. It is tested using the Tango-DT with USB interface on Windows 7. The Tango with PCI and PCIe connector were also tested successfully on Windows 7. To configure Micro-Manager to work with the Märzhäuser Tango you need to do the following:

1.Please refer the CD shipped with the Tango and follow the usual installation procedure.
2.Use the MM hardware configuration wizard for selection of required Märzhäuser components.

See also: Märzhäuser Corvus device adapter.

--Dettmar 24:24, 19 February 2010 (PDT)

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact