Yokogawa CSU22 adapter
|Summary:||Controls Yokogawa CSU22|
|Platforms:||Windows, Mac OS X and linux (serial port)|
|Devices:||Yokogawa CSU22 Hub, Neutral Density Filters, Filter set (dichroics), Shutter, Drive Speed|
|Example Config File:|
This adapter interfaces to the Yokogawa CSU22. There is no additional software needed. Connect the CSU22 to an available serial port on your computer (you will need a special adapter for this at the CSU22 end, I guess it comes with the confocal). Serial port settings are standard (9600 baud, 8 data bits, 1 stop bit, no parity, no handshaking, AnswerTimeout 6000 msec). You will need to defined the Hub device, and assign the right serial port to it.
--Nico 17:10, 8 September 2007 (PDT)