top bar

USB Viper QPL

QiOptiq iFLEX - Viper

Summary:Adapter for the iFLEX-Viper light source
Author: Tom Porter (Excelitas)
License:LGPL
Platforms:Windows
Devices:iFLEX-Viper

Device Configuration

To enable the driver:

  1. Download and install InstaCal from measurement computing. http://www.mccdaq.com/software.aspx
  2. Restart your computer
  3. In the Measurement Computing Folder, run InstaCal.
  4. InstaCal will find a USB-3103 board, add to the configuration file.
  5. When the board is added in InstaCal, ensure the board identifier # is 0.
  6. If the board # is not 0, right click on the USB-3103 device and select "Change Board#..."
  7. Start Micro Manager and the USB_Viper_QPL will be selectable.
© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact