top bar

CoolLED

(Redirected from PrecisExcite)
Summary: Device adapter for CoolLED pE LED illuminators
Authors: Arthur Edelstein
Gordon Scott
Documentation: Arthur Edelstein
Pariksheet Nanda
License: BSD
Platforms: Windows, Mac OS X, Linux (uses virtual serial interface over USB)
Devices: pE-1
pE-2
pE-Integrator
Micro-Manager version >=1.3.34

Installation

Make sure the USB cable is connected, and that the module is powered up.

To install the CoolLED fluorescence illumination systems (pE-1, pE-2, pE-300, pE-4000), one has to choose the preciseExcite device. This is because CoolLED's original product was known as precisExcite and Micro-Manager still knows it by the preciseExcite name.

No installation is required on Mac OS X, since it already has a driver that will recognize the virtual serial port.

No installation is required on Linux, since it already has a driver that will recognize the virtual serial port. The port can usually be found in /dev/serial/by-id

On Windows:

  • Download the file CoolLED-pE-inf.zip from here: www.coolled.com and unzip the CoolLED-pE.inf and .cat files. You may need to ask CoolLED for access to the download area.
  • In the Device Manager, the CoolLED will appear under Other Devices > CoolLED USB ... with a yellow exclamation mark in the device icon.
  • To install your unzipped INF file, in the Device Manager, right-click on CoolLED USB ... > Update Driver Software > Browse my computer for driver software. Set the location to the place you unzipped the INF file.
  • On successful installation, the device will show up as CoolLED USB Virtual Serial Port.

pE-1 and pE-2 have one such port. pE-300 and pE-4000 have two Virtual Serial Ports on the one USB connection.

Device Configuration

In the Hardware Configuration Wizard (under the Micro-Manager Tools menu):

  • In Step 2, add the PrecisExcite device and choose the appropriate COM Port. The default COM port settings (baud rate, etc) will work.
  • In Step 3, you may want to set the Default Shutter to the precisExcite.
  • You may also want to enable the Auto shutter checkbox is so that it automatically opens during a "Snap" or "Acquisition" and close immediately afterwards.

The Trigger and TriggerSequence properties can be used for external triggering by TTL pulses. In the trigger sequence, channels are labeled "A", "B", "C", "D", and a pause is denoted by "0" (zero).


© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact