top bar

Coherent Scientific Remote

Summary:Coherent Scientific Remote Laser Controller
Author:Raimo Hartmann (inspired by an initial contribution by Forrest Collman)
License:BSD
Platforms:All
Devices:Coherent Scientific Remote & Coherent Single Laser Remote
Default serial port settings:
BaudRate 115200
DelayBetweenCharsMs 0
Handshaking Off
Parity None
StopBits 1

This device adapter was written for the Coherent Obis Scientific Remote Laser Controller. Compatibility was also tested with the Coherent Obis Single Remote.
Inside MicroManager, for each connected laser, the following 'properties' are available with this device adapter:

  • Laser Power (%) (Read/Write)
  • Laser State (On/Off) (Read/Write)
  • Modulation/Trigger (CW, Digital, Analog) (Read/Write)
  • Head Usage (h) (Read only)
  • Wavelength (nm) (Read only)
  • Minimum Laser Power (mW) (Read only)
  • Maximum Laser Power (mW) (Read only)
  • Power Readback (mW) (Read only)
  • Laser Port (Read Only)
  • Temperature Baseplate (°C) (Read only)

In addition any laser can be selected for being shuttered software-wise while acquiring an image.

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact