top bar


Revision as of 19:20, 26 February 2019 by Nenad (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Zeiss AxioZoom adapter

Summary:AxioZoom microscope
Author:Nenad Amodaj
Platforms:Windows, Mac OS X and linux (serial port)
Devices:Microscope stand, MotorFocus, XYStage, OpricsUnit, FluoTube, DL450
Default serial port settings:
BaudRate 57600
DelayBetweenCharsMs 0
Handshaking Off
Parity None
StopBits 1

This adapter is a modification of the more comprehensive ZeissCAN29 adapter, specific to AxioZoom microscope. The same as ZeissCAN29 it uses CAN29 bus interface. The adapter directly communicates to the microscope through the serial port (i.e., it does not use the MTB library provided by Zeiss) and therefore works on all platforms. No additional software is needed. USB and ethernet communication is not supported.

Zeiss microscopes require a female-to-female null-modem cable for RS-232 communication.

You will need to define all hardware that is part of your microscope in the Hardware Configuration Wizard (i.e., Micro-Manager does not query the microscope itself for devices present). In any case, you will need to define the 'ZeissScope' device as this defines the serial port to which the scope is attached.

Click here to search for Zeiss on the Micro-Manager mailing list archive.

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact