top bar

Difference between revisions of "Well Plate Plugin"

(Class Functions)
m
Line 23: Line 23:
 
  addClassPath("Big.jar");
 
  addClassPath("Big.jar");
 
  import edu.umassmed.big.SBSPlate;
 
  import edu.umassmed.big.SBSPlate;
 
== Todo ==
 
 
Currently the plugin only supports moving to the center of each well. I want to add functionally to move within a well. I haven't decided on the best way to do this yet.
 
  
 
== Class Functions ==
 
== Class Functions ==
Line 130: Line 126:
 
   
 
   
 
   // move the stage to the next well
 
   // move the stage to the next well
   position = plate.getNextPosition(); // 0 indexed in mcrons
+
   position = plate.getNextPlatePosition(); // 0 indexed in mcrons
 
   mmc.setXYPosition(xystage,position[0],position[1]);
 
   mmc.setXYPosition(xystage,position[0],position[1]);
 
   mmc.waitForDevice(xystage);
 
   mmc.waitForDevice(xystage);

Revision as of 04:54, 17 May 2011

Summary

Summary:Multiwell Plate Java Class
Authors:Karl Bellvé
Maintainers:Karl Bellvé
License:LGPL
Platforms:All


Description

Designed to handle standard SBS well plates from 24, 96, 384 and 1536 wells.

The plugin will calculate the correct coordinates for each well position. You can then iterate through each well, starting at the first well. You may either zero position of the XY stage on the microscope for the center of well A1 to coordinates to {0,0} or you can pass the X and Y offsets.

The plugin will move the stage down or up each column, until the last row, before moving to the next column and reversing direction. The zig-zag path chosen for moving the stage is the fastest path on an Zeiss AxioObserver Z1.

You can change the starting well, or the ending well to only work on a subregion.

Setup

big.jar must be installed and imported into the bsh script.

addClassPath("Big.jar");
import edu.umassmed.big.SBSPlate;

Class Functions

Most functions expect well positions in X, Y coordinates, where X is the long axis, and Y is the short axis of the well plate. X might have a range from 1 to 48 and Y might have a range from 1 to 32, depending upon plate size. Functions with Position in the name return coordinates in microns relative to well A1 plus an offset.

SBSPlate()
Initializes the plugin and uses 96 as the size of the well plate.
SBSPlate(int size)
Initializes the plugin for use with well plate of a set size. Acceptable sizes are 24, 96, 384, and 1536. Assumes Well A1 is at
coordinates 0,0.
SBSPlate(int size, double x, double y)
This also sets the X and Y stage coordinates of well A1. Only use one initialization SBSPlate();
void SetPositionA1(double x, double y)
Tells the class the offset of well A1. If X, and Y can't be set to 0,0 at position A1, then you must use this function.
void setFirstWell(int x, int y)
Changes the starting position from {1,1} to {x,y}, assuming 96 well plate. Index is 1 based. X is the long dimension, and Y is the short dimension of the well plate. For example, setFirstWell(1,2) would start at well B1.
void setLastWell(int x, int y)
Changes the ending position from {12,8} to {x,y}. Index is 1 based. X is the long dimension, and Y is the short dimension of the well plate. For example, setLastWell(10,7) would finish at well G10.
double[] getWellPosition (int x, int y)
Returns the absolute position in microns relative to well A1. Calling X and Y is 1 indexed but returns X and Y 0 indexed position in microns.
String getWellLabel(int well)
Returns the SBS name of the well as a String formatted as letter and number. For example, A01. If you are only using a subregion, then you only need to pass the well number of that subregion, with well 1 being the start of the subregion. The function will calculate the correct SBS label of that subregion based on where that subregion is on the well plate.
int getNumberOfWells()
Returns the number of wells in the entire plate, or the number of wells in a subregion.
int getNumberOfWellPositions()
Returns the number of positions in the current well if it exists, otherwise :returns the number of positions in the global list.
int getNumberOfWellPositions(int well)
Returns the number of positions in a specific well if it exists, otherwise :returns the number of positions in the global list.
double[] getNextPosition()
Deprecated. Please use getNextPlatePosition()
double[] getNextPlatePosition()
Returns the {x,y} coordinates in microns of the next well. If at the last :well, it will return the first well's coordinates.
double[] getNextWellPosition(int well)
Returns the {x,y} coordinates in microns of the next position within a :specific well.
void addPosition(double x, double y, double z)
Adds a x,y,z position to the global position list. X and Y submitted values :need to be passed relative to the center of the well. X, and Y are lated :returned as absolute positions. Z is later returned unmodified.
void addPosition(double x, double y, double z, int well)
Adds a x,y,z position to a specific well. Any positions stored for a specific :well overrides global position lists. X and Y submitted values need to be :passed relative to the center of the well. X, and Y are later returned as :absolute positions. Z is later returned unmodified.
void clearPositions()
Clears the global position list
void clearPositions(int well)
Clears the position list of a specific well
void skipWell(Boolean skip)
Use to either to skip or not skip (default) the current well.
Boolean skipWell(int well)
Returns TRUE if the specific well needs to be skipped.

Example Micro-Manager BSH Script

import edu.umassmed.big.SBSPlate;

gui.closeAllAcquisitions();
gui.clearMessageWindow();

xystage = mmc.getXYStageDevice();

double[] position = {0,0}; // 0 indexed in microns.
//
// Well A1 should be centered with the objective.
// You can zero your stage, or use the X and Y offsets for well A1
//
// This assumes Well A1 is zeroed
mmc.setXYPosition(xystage,position[0],position[1]);
mmc.waitForDevice(xystage);
//
// This assumes Well A1 has an X and Y offset
//
double startX = mmc.getXPosition(xystage);
double startY = mmc.getYPosition(xystage);

// Pass the well plate type, and optionally pass the X and Y micron offset of well A1
SBSPlate plate = new SBSPlate(96,startX, startY);

numberOfWells = plate.getNumberOfWells();

// setting first and last well is optional if you want to define a smaller region.
plate.setFirstWell(1,1); // can't be less than 1, or greater than setLastWell();
plate.setLastWell(12,8); // X = 12 and Y = 8 is maximum value for 96 well plate and correspond to well H12

for (m = 1; m <= numberOfWells; m++) {
  // code to take an image could be here


  // move the stage to the next well
  position = plate.getNextPlatePosition(); // 0 indexed in mcrons
  mmc.setXYPosition(xystage,position[0],position[1]);
  mmc.waitForDevice(xystage);
}
// return stage to starting position, either to {0,0} or {startX, startY}
mmc.setXYPosition(xystage,startX,startY);
mmc.waitForDevice(xystage);


--Karl Bellvé, Biomedical Imaging Group, University of Massachusetts 20:02, 9 February 2011 (UTC)

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact