top bar

Difference between revisions of "USB Viper QPL"

(Created page with "{| style="text-align: left" !Summary: |Interfaces with Excelitas/Qioptiq iFLEX-Viper Laser Engine |- !Author: |Excelitas |- !License: |BSD |- valign="top" !Platforms: |Windows...")
 
(QiOptiq iFLEX - Viper)
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
{| style="text-align: left"
+
== QiOptiq iFLEX - Viper ==
!Summary:
+
 
|Interfaces with Excelitas/Qioptiq iFLEX-Viper Laser Engine
+
<table><tr><td>
|-
+
'''Summary:'''</td><td>Adapter for the iFLEX-Viper light source</td></tr>
!Author:
+
<tr><td>'''Author:'''</td><td> Tom Porter (Excelitas)</td></tr>
|Excelitas
+
<tr><td>'''License:'''</td><td>LGPL</td></tr>
|-
+
<tr><td>'''Platforms:'''</td><td>Windows</td></tr>
!License:
+
<tr><td>'''Devices:'''</td><td>iFLEX-Viper</td></tr>
|BSD
+
</table>
|- valign="top"
+
 
!Platforms:
+
== Device Configuration ==
|Windows
+
To enable the driver:
|}
+
# Download and install InstaCal from measurement computing. http://www.mccdaq.com/software.aspx
----
+
# Restart your computer
 +
# In the Measurement Computing Folder, run InstaCal.
 +
# InstaCal will find a USB-3103 board, add to the configuration file.
 +
# When the board is added in InstaCal, ensure the board identifier # is 0.
 +
# If the board # is not 0, right click on the USB-3103 device and select "Change Board#..."
 +
# Start Micro Manager and the USB_Viper_QPL will be selectable.
 +
 
 +
{{Devices_Sidebar}}

Latest revision as of 08:24, 12 December 2016

QiOptiq iFLEX - Viper

Summary:Adapter for the iFLEX-Viper light source
Author: Tom Porter (Excelitas)
License:LGPL
Platforms:Windows
Devices:iFLEX-Viper

Device Configuration

To enable the driver:

  1. Download and install InstaCal from measurement computing. http://www.mccdaq.com/software.aspx
  2. Restart your computer
  3. In the Measurement Computing Folder, run InstaCal.
  4. InstaCal will find a USB-3103 board, add to the configuration file.
  5. When the board is added in InstaCal, ensure the board identifier # is 0.
  6. If the board # is not 0, right click on the USB-3103 device and select "Change Board#..."
  7. Start Micro Manager and the USB_Viper_QPL will be selectable.
© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact