top bar

Difference between revisions of "Thorlabs"

m
m
Line 15: Line 15:
  
 
=== Setup ===
 
=== Setup ===
This adapter requires the following serial port parameters:
+
This adapter requires only a serial serial port (RS-232). One port should be reserved for this stage and initialized with the following parameters:
  
 
BaudRate: 115200
 
BaudRate: 115200
Line 26: Line 26:
  
 
(all other micro-manager port parameters can be left with defaults)
 
(all other micro-manager port parameters can be left with defaults)
 +
 +
The only parameter that is required for configuration of the stage is the name of the serial port (e.g. COM2) attached to the controller.
 +
 +
=== Using the stage ===

Revision as of 12:46, 25 March 2011

XY Stage

Summary:XY Stage - brushless DC motor controller BBD 102
Author:Nenad Amodaj
License:BSD
Platforms:All platforms (uses serial port)
Devices:XYStage
Example Config File:See below

XY stage device adapter that works with BBD 102 brushless DC motor contoroller[1] and supports high speed motorized scanning stage MLS 203 [2].

Setup

This adapter requires only a serial serial port (RS-232). One port should be reserved for this stage and initialized with the following parameters:

BaudRate: 115200

Handshaking: Off

Parity: None

StopBits: 1

(all other micro-manager port parameters can be left with defaults)

The only parameter that is required for configuration of the stage is the name of the serial port (e.g. COM2) attached to the controller.

Using the stage

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact