top bar

Difference between revisions of "TSI"

(Installation Instructions)
(Installation Instructions)
Line 23: Line 23:
 
After adding the TSICam device, proceed to next steps of the Hardware Configuration Wizard as described in the micro-manager documentation.
 
After adding the TSICam device, proceed to next steps of the Hardware Configuration Wizard as described in the micro-manager documentation.
  
=== Leagacy Camera Support ===
+
=== Legacy Camera Support ===
 +
 
 +
If you have one of the legacy camera models (consult Thorlabs support if you are not sure) this driver should work. Verify that TSI_SDK.dll file is present in the micro-manager directory. However, you can not have both legacy and standard cameras connected with the same computer.

Revision as of 12:05, 18 December 2018

Summary: Thorlabs Scientific Imaging Cameras (former DVC)

Summary:Thorlabs Scientific Imaging (TSI) Camera
Author:Nenad Amodaj
License:BSD
Platforms:Microsoft Windows 7 and up, both 32 and 64 bit
Devices:all Thorlabs Scientific Imaging series cameras

Installation Instructions

This adapter is compatible with all Thorlabs Scientific Imaging cameras (TSI). Before configuring the camera with micro-manager, ThorCam software must be installed and verified to operate as intended. After installing ThorCam software make sure that camera is fully functional and that it can acquire both in single image and live streaming mode.

Make sure that both micro-manager and any Thorlabs camera related software is shut down. Locate all files in the ThorCam/Scientific Camera Support/Scientific Camera Interfaces/SDK/Native Compact Scientific Camera Toolkit/dlls/Native_64_lib (or Native_32_lib for 32-bit OS) directory and copy them into the micro-manager installation directory.

After that the camera should be ready for configuration with micro-manager. Start micro-manager and select Tools | Hardware Configuration Wizard command to add TSI camera to the configuration.

At step 2 (Add or Remove Devices) of the Wizard, scroll Available Devices list to *TSI*. There should be only one device available: TSICam. Select TSICam and add to the configuration. You will be prompted to enter the camera ID. Default is "0" and leave it at that. Multiple cameras on the same computer are not currently supported.

After adding the TSICam device, proceed to next steps of the Hardware Configuration Wizard as described in the micro-manager documentation.

Legacy Camera Support

If you have one of the legacy camera models (consult Thorlabs support if you are not sure) this driver should work. Verify that TSI_SDK.dll file is present in the micro-manager directory. However, you can not have both legacy and standard cameras connected with the same computer.

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact