top bar

Difference between revisions of "SutterLambda"

(Warn about old firmware problem)
(Device Configuration)
Line 21: Line 21:
  
 
== Device Configuration ==
 
== Device Configuration ==
 +
 +
=== Serial port issues ===
 +
Sutter devices use a straight through (i.e., not null modem) DB9 serial cable.  The default baud rates are 9600 for serial ports and 128800 for USB ports (which use a build-in USB-serial converter)
  
 
=== Wheel speed ===
 
=== Wheel speed ===

Revision as of 13:08, 30 January 2014

Summary: Interfaces to Sutter Lambda 10 controllers, Lambda SC controller, and DG4
Authors: Nenad Amodaj
Maintainers: Arthur Edelstein
License: BSD
Platforms: Windows, Mac OS X and Linux (only serial port, no parallel port or USB)
Devices: Lambda SC
Lambda 10-B
Lambda 10-2
Lambda 10-3
Lambda DG-4

Device Configuration

Serial port issues

Sutter devices use a straight through (i.e., not null modem) DB9 serial cable. The default baud rates are 9600 for serial ports and 128800 for USB ports (which use a build-in USB-serial converter)

Wheel speed

95% of the time speed #1 works best (#0 being the fastest, which only works with an empty wheel). If speed #1 does not work you can try the slowest (speed #7 IIRC). Best practice is to set the desired wheel speed during startup, i.e. in your Startup Preset of the System Group.

Troubleshooting

Wheel re-homing during imaging

First make sure your firmware is up-to-date. Lambda 10-B controllers with firmware < 2.22 were known to have this issue.

Then one should just optimize the filter speed setting if you ever encounter the dreaded re-homing sound due to the wheel failing to move to a filter position during Multi-Dimensional Acquisition. The wheel itself has a resonance frequency associated with the load of filters. Practically one finds the ideal speed by empirically checking which speed introduces the least vibration.


© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact