top bar

Difference between revisions of "PrecisExcite"

(CoolLED LED illuminators)
(CoolLED LED illuminators)
Line 1: Line 1:
 
== CoolLED LED illuminators ==
 
== CoolLED LED illuminators ==
 
<table><tr><td>
 
'''Summary:'''</td><td>Device adapter for the CoolLED pE LED illuminators ([http://www.CoolLED.com  http://www.CoolLED.com])</td></tr>
 
<tr><td>'''Author:'''</td><td>Arthur Edelstein, updated by Gordon Scott.
 
<tr><td>'''License:'''</td><td>BSD</td></tr>
 
<tr><td>'''Platforms:'''</td><td>Windows, Mac OS X, Linux (uses virtual serial interface over USB)</td></tr>
 
<tr><td>'''Devices:'''</td><td>Shutters</td></tr>
 
<tr><td>'''Example Config File:'''</td><td>None</td></tr>
 
<tr><td>'''Micro-Manager version:'''</td><td>>=1.3.34</td></tr>
 
</table>
 
  
 
<p>
 
<p>
[[CoolLED]]'s original product was known as precisExcite and at present the Micro-Manage software still knows it by that name. The names of the current current products controlled by this driver are pE-1, pE-2 and pE-Integrator.
+
'''precisExcite''' was the original name of the first [[CoolLED]] product, and at present the Micro-Manage software still knows it by that name. The names of the current current products controlled by this driver are pE-1, pE-2 and pE-Integrator.
 
</p>
 
</p>
  
<p>
+
#REDIRECT [[CoolLED]]
On Windows, first make sure the driver is installed (CoolLED-pEx.inf).
+
(Mac OS X already has a driver that will recognize the virtual serial port.)
+
Next, make sure the USB cable is connected, and that the module is powered up.
+
Then in the Hardware Configuration Wizard (under the Micro-Manager Tools menu),
+
choose the appropriate Com Port in Step 2 and add the PrecisExcite device in Step 3.
+
</p>
+
 
+
<p>
+
precisExcite can be chosen as the default Shutter. This means that
+
when "Auto shutter" is selected in the main window, it will
+
automatically turn on (with the current channel and intensity
+
settings) during a "Snap" or "Acquisition" and turn off immediately
+
afterwards.
+
</p>
+
 
+
<p>
+
The Trigger and TriggerSequence properties can be used for external triggering by TTL pulses.
+
In the trigger sequence, channels are labeled "A","B","C","D", and a pause is denoted by "0" (zero).
+
</p>
+
  
 
{{Devices_Sidebar}}
 
{{Devices_Sidebar}}

Revision as of 02:35, 14 May 2012

CoolLED LED illuminators

precisExcite was the original name of the first CoolLED product, and at present the Micro-Manage software still knows it by that name. The names of the current current products controlled by this driver are pE-1, pE-2 and pE-Integrator.

  1. REDIRECT CoolLED
© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact