top bar

Difference between revisions of "PrecisExcite"

(New page: == PI Z Stage == <table><tr><td> '''Summary:'''</td><td>Interfaces with [http://ww.pi.ws Physik Instrumente (PI)] controllers and associated hardware using the SCPI command set</td></tr> ...)
 
Line 1: Line 1:
== PI Z Stage ==
+
== PrecisExcite LED illuminator ==
  
 
<table><tr><td>
 
<table><tr><td>
'''Summary:'''</td><td>Interfaces with [http://ww.pi.ws Physik Instrumente (PI)] controllers and associated hardware using the SCPI command set</td></tr>
+
'''Summary:'''</td><td>Device adapter for the PrecisExcite LED illuminator ([http://www.precisexcite.com  http://www.precisExcite.com])</td></tr>
 
<tr><td>'''Author:'''</td><td>Arthur Edelstein
 
<tr><td>'''Author:'''</td><td>Arthur Edelstein
 
<tr><td>'''License:'''</td><td>BSD</td></tr>  
 
<tr><td>'''License:'''</td><td>BSD</td></tr>  

Revision as of 11:16, 19 March 2009

PrecisExcite LED illuminator

Summary:Device adapter for the PrecisExcite LED illuminator (http://www.precisExcite.com)
Author:Arthur Edelstein
License:BSD
Platforms:Windows (uses virtual serial interface over USB)
Devices:Shutters
Example Config File:None
Micro-Manager version:>=1.3.34


To use a precisExcite, first make sure the USB-serial driver is installed, the USB cable is connected, and that the module is powered up. Then in the Hardware Configuration Wizard (under the Micro-Manager Tools menu), choose the appropriate Com Port in Step 2 and add the PrecisExcite device in Step 3.

The precisExcite can be chosen as the default Shutter. This means that when "Auto shutter" is selected in the main window, it will automatically turn on (with the current channel and intensity settings) during a "Snap" or "Acquisition" and turn off immediately afterwards.

The Trigger and TriggerSequence properties can be used for external triggering by TTL pulses. In the trigger sequence, channels are labeled "A","B","C","D", and a pause is denoted by "0" (zero).

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact