top bar


Revision as of 14:32, 22 April 2011 by Arthuredelstein (Talk | contribs)

Summary:Interface to Parallel port on Windows
Author:Nenad Amodaj
Devices:Windows Parallel Port
Example Config File:

This adapter makes the parallel port available as a digital output device, i.e., it provides a way of setting TTLs. It uses inpout.dll to talk to the parallel port. The pins in the parallel port are set using a single binary value, where each position in the number corresponds to a pin in the port.

For instance:
1023 (1111111111) will set pins 1 through 10 high
0 (0000000000) will set pins 1 through 10 low
6 (0110000000) will set pins 2 and 3 high and all others low.

Note that this adapter does not provide a shutter device. The AOTF adapter provides a shutter that can set pins of the parallel port.

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact