top bar

Difference between revisions of "NikonTI"

(Nikon TI motorized microscope)
m (Nikon TI motorized microscope)
Line 9: Line 9:
<tr><td width=20%>'''Since version'''</td><td>1.2.18</td></tr>
<tr><td width=20%>'''Since version'''</td><td>1.2.18</td></tr>
<tr><td><b>Peripheral device discovery:</b></td><td>Supported</td></tr>
<tr><td><b>Peripheral device discovery:</b></td><td>Supported</td></tr>

Revision as of 13:59, 22 April 2011

Nikon TI motorized microscope

Summary:Adapter for Nikon TI motorized microscopes
Author:Nico Stuurman and Roy Wollman
Karl Hoover (additional accessory devices, Matlab compatibility & maintenance)
License:Source code cannot be made available
Platforms:Windows only (uses driver supplied by Nikon)
Devices:TIScope, NosePiece, Shutter, Epi-Shutter, Optical Path, FilterBlockCassette, Focus (z-drive), PerfectFocus, XYStage, HalogenLamp, TIRF attachment
Since version1.2.18
Peripheral device discovery:Supported

This adapter communicates to all the devices in the TI through the TIScope. Thus, to use any of these devices, you will need to first define the TISCopedevice.

This adapter uses the driver and API supplied by Nikon. The latest version of TI Tool (which includes a driver for the TI microscope) can be downloaded from the Nikon website

Support for control of the HalogenLamp ('DiaLamp') was added in version 1.3.18. The Halogenlamp cannot be controlled simultaneously using the dial and button on the scope and through the computer. To switch between manual and computer control use the property 'ComputerControl'. Lamp intensities set through manual control and through computer control are completely independent (i.e., when setting lamp intensity using the dial on the scope and switching to computer control, light intensity will be different).

As of version 1.3.43, Micro-Manager works with Nikon TI driver 2.0.2 and higher (included with TI Tool 4.0).

--Nico 16:31, 10 June 2008 (PDT)

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact