top bar

Difference between revisions of "MicroPoint"

(Device Configuration)
(Detail how MicroPoint appears in Windows.)
Line 21: Line 21:
 
=== USB Driver ===
 
=== USB Driver ===
  
The MicroPoint controller contains it's own USB-Serial convertor.  If this driver is already installed, nothing further needs to be done.  Otherwise you must install the Andor MicroPoint driver to recognize the USB COM port in the Windows Device Manager. These are publicly available on [http://www.andor.com/my/user/ MyAndor website] under <code>Drivers and 3rd Party > Driver: Micropoint</code>. Yes, you have to register and login to download the file.
+
The MicroPoint controller contains it's own USB-Serial convertor.  If the FTDI Virtual COM Port driver is already installed, nothing further needs to be done.  On Windows, the installed driver shows up in the Device Manager as:
 +
 
 +
      Ports (COM & LPT)
 +
      `-USB Serial Port (COM*)
 +
 
 +
When the MicroPoint is not installed, it shows up in the Device Manager as:
 +
 
 +
      Other devices
 +
      `-(?) USB I/O 24 R
 +
 
 +
To install the FTDI Virtual COM Port driver visit [http://www.andor.com/my/user/ MyAndor website] and find the public driver under <code>Drivers and 3rd Party > Driver: Micropoint</code>. Yes, you have to register and login to download the file.
  
 
== Device Configuration ==
 
== Device Configuration ==

Revision as of 06:08, 24 October 2013

Summary: Interfaces with Andor MicroPoint pulse laser targeting device
Author: Arthur Edelstein
License: 3-clause BSD
Platforms: Windows (No Linux or Mac driver available)
Devices: MP-220*-EBD

Installation

USB Driver

The MicroPoint controller contains it's own USB-Serial convertor. If the FTDI Virtual COM Port driver is already installed, nothing further needs to be done. On Windows, the installed driver shows up in the Device Manager as:

     Ports (COM & LPT)
     `-USB Serial Port (COM*)

When the MicroPoint is not installed, it shows up in the Device Manager as:

     Other devices
     `-(?) USB I/O 24 R

To install the FTDI Virtual COM Port driver visit MyAndor website and find the public driver under Drivers and 3rd Party > Driver: Micropoint. Yes, you have to register and login to download the file.

Device Configuration

The Projector plugin operates the Micropoint. There are 2 behaviors of the plugin unique to the Micropoint:

  1. The dwell time setting has no effect. It exists because the plugin was originally written for SLM devices.
  2. The plugin does not allow 2D regions with the MicroPoint; only point regions. To draw multiple points, right-click the point tool and select "Multi-points Tool". If you need to use line or 2D regions, one could extend the MicroPoint device adapter to handle these.

Micropoint-calibration.png Figure: The calibration process completes two steps. First, it fires a crosshair pattern to determine the camera orientation (left image), and then fires a grid pattern across the range of the phototargeting device (right image). The algorithm accounts for the device range exceeding exceeding the camera sensor size, but the orientation pattern must be captured within the camera field of view.

FIXME: Describe range limit and what happens when targeting outside the galvo range.

Resources

Development support

Please liaison with Micro-Manager developers to contact the Andor software team

Click here to search for MicroPoint on the Micro-Manager mailing list archive.

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact