top bar


Revision as of 14:06, 6 November 2018 by Nenad (Talk | contribs)

JAI Cameras with USB interface and eBUS drivers

Summary:JAI Cameras with eBUS drivers
Author:Nenad Amodaj
Platforms:Windows 7, 8 and 10, both 32 and 64
Devices:all JAI APEX series cameras, with USB interface and eBUS drivers

Installation Instructions

Instructions apply only to JAI cameras based on the Pleora eBUS interface, such as Apex Series. At this time only Apex Series color cameras with USB interface are supported.

Windows 7 and higher is supported, both 32 and 64-bit/ driver was tested on AP-3200T-USB camera model on Windows 10 with 64-bit version of Micro-manager.

Download and install JAI SDK from JAI support page. Select APEX series eBUS-SDK for JAI, either 64-bit or 32-bit, depending on which version of Micro-manager you intend to use the camera with (64-bit or 32-bit). Installing eBUS-SDK is the only requirement for using Apex Series cameras with Micro-manager.

Open eBus Player application and verify the camera is working as expected before configuring it with Micro-manager. JAI cameras are supported in Micro-manager Nightly Builds starting on November 1, 2018.

Hardware Configuration Wizard Notes

Start Micro-manager and select Tool | Hardware Configuration Wizard command. Create new configuration and scroll down the “Available Devices” tree to “JAI” entry. Expand the node and select JAI Camera. Press “Add” button. Camera dialog will pop up

Currently multiple camera configurations are not supported, so leave CameraID as “0”. This number will be ignored.

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact