top bar

File:ITC18.csh

Revision as of 10:33, 9 November 2009 by Kdb (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
ITC18.csh(file size: 9 KB, MIME type: application/x-csh)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.

This is a csh script that generates an imaging protocol file for use by the ITC18. This script is complicated and shouldn't be used as is.

Camera trigger is assumed to be connect to TTL output 0. Shutters 1,2,3 are connected to TTL ouput 1,2,3. EPI and TIRF are switches that activate shutters 4,5 connected to TTL output 4 and 5. Filter positions are for a Sutter 10-2, using TTL outputs 8-15 found on the back of the ITC18.

This script is for a very advanced user.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current10:33, 9 November 2009 (9 KB)Kdb (Talk | contribs)This is a csh script that generates an imaging protocol file for use by the ITC18. This script is complicated and shouldn't be used as is. Camera trigger is assumed to be connect to TTL output 0. Shutters 1,2,3 are connected to TTL ouput 1,2,3. EPI and TIRF are switches that activate shutters 4,5 connected to TTL output 4 and 5. Filter positions are for a Sutter 10-2, using TTL outputs 8-15 found on the back of the ITC18. This script is for a very advanced user.
  • You cannot overwrite this file.

The following page links to this file:

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact