top bar

Difference between revisions of "Download Micro-Manager Latest Release"

(Nightly Builds)
 
(31 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
 +
[[Image:NewLogo.png]]
 +
 +
<span style="font-size:75%">μManager™ is a trademark of The Regents of the University of California. Used with Permission.</span>
 +
 +
== Micro-Manager versions ==
 +
Currently, there are 2 usable versions of Micro-manager: 1.4 and 2.0-gamma.  These versions use the same code to interface to devices, but differ in their user interface, and file reading/saving code.  2.0-gamma is actively developed and maintained.  1.4 is no longer developed (except for the device support and the ASI diSPIM plugin).  If you start using Micro-Manager, it is recommended to use the latest nightly build of 2.0-gamma
 +
 
[[Micro-Manager_Version_Archive|(Previous releases)]]
 
[[Micro-Manager_Version_Archive|(Previous releases)]]
  
== Micro-Manager 1.4.17 (April 30, 2014) ==
+
== Nightly Builds ==
  
[http://valelab.ucsf.edu/~MM/builds/1.4/Windows/32bit/MMSetup_32bit_1.4.17.exe Windows 32-bit], 55 MB<br />
+
Although there has been no official release for quite some time, further development and multiple bug fixes have occurred in the 1.4 branch in parallel with development of 2.0. Nightly builds are almost always stable and a better choice for most users than the latest official release.
[http://valelab.ucsf.edu/~MM/builds/1.4/Windows/64bit/MMSetup_64bit_1.4.17.exe Windows 64-bit], 57 MB<br />
+
  
[http://valelab.ucsf.edu/~MM/builds/1.4/Mac/Micro-Manager1.4.17.dmg Mac OS X (Universal Binary)], 43 MB<br />
+
* [http://valelab.ucsf.edu/~MM/nightlyBuilds/2.0.0-gamma/Windows/ '''Version 2.0-gamma (Windows)'''] (you most likely want the 64-bit version)
(Note for OS X 10.8 or later: if the application does not open when double-clicked for the first time, try ctrl-click or right click, then select "Open".)
+
* [http://valelab.ucsf.edu/~MM/nightlyBuilds/2.0.0-gamma/Mac/ '''Version 2.0-gamma (Mac)''']
 +
* [http://valelab4.ucsf.edu/~MM/nightlyBuilds/1.4/Windows '''Version 1.4 (Windows)'''] (pay attention to 32-bit or 64-bit, both are listed but you need the one matching your Windows OS)
 +
* [http://valelab4.ucsf.edu/~MM/nightlyBuilds/1.4/Mac '''Version 1.4 (Mac)''']
  
=== Known issues in 1.4.17 ===
+
== Micro-Manager 1.4.22 (August 14, 2015) ==
  
* On OS X 10.8 or later, when opening ImageJ64.app, you may get an error message saying that the application is "damaged". If so, you need to temporarily enable the following setting while opening the application for the first time: System Preferences > Security & Privacy > General > Allow applications downloaded from > Anywhere. Once opened successfully, the error should go away even if you switch back the security setting.
+
Read the [[#Known_issues_in_1.4.22|Known Issues]].
  
=== Changes in 1.4.17 (since 1.4.16) ===
+
* [http://valelab4.ucsf.edu/~MM/builds/1.4/Windows/32bit/MMSetup_32bit_1.4.22.exe Windows 32-bit], 63.4 MB<br />
 +
* [http://valelab4.ucsf.edu/~MM/builds/1.4/Windows/64bit/MMSetup_64bit_1.4.22.exe Windows 64-bit], 65.1 MB<br />
 +
Requires Windows XP, or 7-10. Windows 7 recommended. Device drivers may have other requirements.<br />
  
* New in the main application
+
* [http://valelab4.ucsf.edu/~MM/builds/1.4/Mac/Micro-Manager1.4.22.dmg Mac OS X (Universal Binary)], 54.0 MB<br />
** Make Tile Creator ("Create Grid") use the correct stages (Nico Stuurman)
+
Requires Mac OS X 10.5-10.10. 10.11 (El Capitan) is not yet supported. Device drivers may have other requirements.<br />
** Tile Creator "Center Here" button no longer immediately closes the dialog (Chris Weisiger)
+
(OS X 10.8 and later: if the application does not open when double-clicked for the first time, try ctrl-click or right click, then select "Open".)
** Fix bug in position list where removing multiple positions could cause the wrong positions to be removed (Chris Weisiger)
+
** Plugins menu is now organized into categories, sorted alphabetically, and has improved tooltips (Nico Stuurman, Mark Tsuchida)
+
** New "Report Problem" interface (Mark Tsuchida)
+
** Script Panel has improved syntax highlighting, line numbers, and code folding (Nico Stuurman)
+
** Make "display fps" reflect reality (Nico Stuurman)
+
** Fix bug that caused some debug logging entries to be logged even when debug logging is off (Mark Tsuchida)
+
** Fix a memory leak that could occur during long sequence acquisitions (Mark Tsuchida)
+
** MAC address enumeration issue on Linux is fixed (Erik Hvatum)
+
** Add cancel button to splash screen (Nico Stuurman)
+
** Various bigfixes and minor enhancements (Nico Stuurman, Henry Pinkard, Arthur Edelstein, Chris Weisiger, Mark Tsuchida)
+
  
* New plugins
+
* Under GNU/Linux platforms, you should [[Linux_installation_from_source_(Ubuntu)|compile micro-manager from source]].
** [[AcquireMultipleRegions|Acquire Multiple Regions]] Automatically acquire multiple regions of a sample (Kurt Thorn)
+
** [[AutoLase]]: Real-time closed-loop control of density of photoactivated molecules during PALM measurement (Thomas Pengo, Seamus Holden)
+
** [[Tracker Plugin|Live Tracking]] (revived): Use image correlation to countersteer the XY stage (Nico Stuurman, Mark Tsuchida)
+
** [[pgFocus]]: Control the pgFocus open-source software/hardware focus stabilization device (Karl Bellve)
+
  
* Updated plugins
+
=== Known issues in 1.4.22 ===
** [[ASIdiSPIM Plugin|ASIdiSPIM]]: Numerous enhancements (Jon Daniels, ASI; Nico Stuurman)
+
** BFCorrector: Fix handling of 16-bit pixels; marked BFCorrector as obsolete as it is superseded by MultiChannelShading
+
** [[MultiChannelShading|Multi-Channel Shading]]: Fix crash when defining new groups (Kurt Thorn)
+
** [[Projector]]: Enhancements to ROI support (Arthur Edelstein)
+
** [[Stage Control]]: Wait for device to finish movement before updating displayed position (Nico Stuurman)
+
  
* New device adapters
+
* If you use AndorSDK3 (Andor sCMOS cameras) and experience a crash upon starting Micro-Manager (or loading a hardware configuration), please upgrade to the 20150820 nightly build ([http://valelab4.ucsf.edu/~MM/nightlyBuilds/1.4/Windows/MMSetup_64bit_1.4.23_20150820.exe Windows 64-bit], [http://valelab4.ucsf.edu/~MM/nightlyBuilds/1.4/Windows/MMSetup_32bit_1.4.23_20150820.exe Windows 32-bit])
** [[CONEX]]: Newport CONEX-CC DC-Servo Controller (Newport)
+
* Olympus IX83 users: please use 1.4.21 instead.
** [[IIDC]]: IIDC 1394 cameras (future replacement for [[dc1394]], currently monochrome only) (Mark Tsuchida)
+
** [[MoticCamera]] (new on OS X): Motic cameras (Motic)
+
** [[ObjectiveImaging]]: Objective Imaging OASIS controller (Egor Zindy)
+
** [[pgFocus]]: pgFocus (open-source software/hardware focus stabilization device) (Karl Bellve)
+
** [[PICAM]]: Princeton Instruments cameras, using the PICAM SDK (Toshio Suzuki)
+
** [[ThorlabsAPTStage]]: Thorlabs APT family linear stages (a newly extended version of ThorlabsDCStage) (Egor Zindy)
+
** [[ThorlabsMFC1]]: Thorlabs MFC1 Motorized Microscope Focus Controller (Thomas Zangle)
+
  
* New closed-source device adapters
+
=== Changes in 1.4.22 (since 1.4.21) ===
** [[Mosaic3]]: Andor Mosaic 3 Digital Mirror Device (Arthur Edelstein for Andor)
+
  
 +
* Bugfixes and enhancements in the main application
 +
** Fix a hang when restarting MDA with data processors installed while Live mode is running (Mark Tsuchida)
 +
** When adding Z stage devices, the user may now specify the directionality of the stage (whether positive or negative directions move closer to the sample)
 +
** Fix a bug with storage of user configuration data on Windows 8 and later operating systems (Chris Weisiger)
 +
** Bugfixes relating to saved data:
 +
*** Fix a minor bug in formatting of metadata in multipage TIFF files (Mark Tsuchida)
 +
*** Fix a bug causing truncation of OME Medatada (Chris Weisiger)
 +
*** Fix a memory leak noticeable when running acquisitions with large position lists (Chris Weisiger)
 +
** Display bugfixes:
 +
*** Fix a bug causing RGB channels to be swapped when loading files (Chris Weisiger)
 +
*** Fix display of total timepoints in cancelled acquisitions (Chris Weisiger)
 +
** Fix a bug in behavior of slider controls in European locales (Mark Tsuchida)
 +
** Fix a NullPointerException when the logfile directory is missing (Mark Tsuchida)
 +
** Fix a NullPointerException in the Metadata panel (Nico Stuurman)
 +
** Correctly remember autofocus parameters in preferences (Mark Tsuchida)
 +
** Enable high-resolution rendering on Macs with Retina Displays
 +
** Add setting for focus stage coordinate polarity in Hardware Configuration Wizard (Mark Tsuchida)
 +
* New plugins
 +
** Mightex Polygon, for controlling the Polygon patterned illuminator devices
 +
* Updated plugins
 +
** ASIdiSPIM: numerous bugfixes and improvements (Jon Daniels, Nico Stuurman)
 +
** Projector: numerous bugfixes and improvements (Jon Daniels, Nico Stuurman)
 +
** HCS Site Generator
 +
*** Improved acquisition pathing within a well, using a snakelike route (Nico Stuurman)
 +
*** add support for 6- and 12-well plates (Thomas Petebauer, Chris Weisiger)
 +
* Autofocus plugins
 +
** Added NullAutofocus, an autofocus method that does nothing, useful in certain complex acquisitions (Mark Tsuchida)
 +
* New device adapters
 +
** CNCMicroscope adapters (David Konerding)
 +
*** ArduinoNeoPixel: Adafruit NeoPixel sheild as a shutter
 +
*** RAMPS: RepRap RAMPS/Marlin motor drivers as XY and Z stage
 +
** Diskovery: Andor Diskovery multi-modal imaging system (Nico Stuurman)
 +
** Standa8SMC4: An alternative Standa stage adapter using the XIMC motion control library (Eugene Seliverstov)
 
* Updated device adapters
 
* Updated device adapters
** [[Andor]]: Fix actual interval property and error during external trigger; Fix spurious noise filter control (Matthew Milford, Andor)
+
** Andor: Update Andor DLLs; add iXon 888 isolated crop ROIs; support FVB mode; add hardware timestamps on compatible cameras; fix Exposure display (Matthew Milford, Andor)
** [[AndorLaserCombiner]]: Add SaveLifetime and IsLinear properties; allow TTL option in Enable property (Pariksheet Nanda)
+
** AndorSDK3: Allow fast exposure switching for Snap; allow switching on/off static blemish correction; add shutter control properties (Matthew Milford and Francis McCloy, Andor)
** [[AndorSDK3]]: Add support for Auxiliary Out TTL I/O pin; Linux support; various bugfixes (Norman Glasgow, Andor; Erik Hvatum)
+
** AndorShamrock: Add Rayleigh wavelength property; other fixes (Francis McCloy, Andor)
** [[ASITiger]]: Add property to reverse axis directions and interchange X and Y; various fixes and minor enhancements (Jon Daniels, ASI)
+
** ASITiger: Support SetOriginX/Y; updates to scanner and PLogic; hardware sequencing support for piezo (Jon Daniels, ASI)
** [[IDS_uEye]]: Add color support, bit depth selection, and external trigger; improve binning support (Wenjamin Rosenfeld)
+
** Cobolt: Fix a serial communication issue (Mark Tsuchida)
** [[NikonTE2000]]: Fix Uniblitz shutter support (Mark Tsuchida)
+
** GigECamera: Avoid an error while connecting with some cameras (Mark Tsuchida)
** [[PCO_Camera]]: Fixed time setting, ROI, and binning issues; tested simultaneous full-fps acquisition with two pco.edge_4.2 using Multi Camera; various bugfixes (Franz Reitner, PCO)
+
** IIDC: Add limited/experimental color camera support (Mark Tsuchida)
** [[PI_GCS_2]]: Add support for C-865 and E-816 (E-665, E-625, E-621) with firmware < 2.11; added E-709 and C-884 as preconfigured controller; default axis names are now "1" and "2"; fixed hang with C-867.262; other fixes and enhancements (Steffen Rau, Physik Instrumente)
+
** LeicaDMI: Add fixed shutter delay setting (Egor Zindy); fix turret control issues with DMi8 (Mark Tsuchida)
** [[Piper]]: Reinstated (was missing from 1.4.16 due to build compatibility issues); improved handling of property updates (Terry Sprout for Stanford Photonics)
+
** Marzhauser: Fix potential serial communication issue (Falk Dettmar, Marzhauser)
** [[PVCAM]]: Add ExposeOutMode property; support new trigger modes for OptiMos; various fixes; OptiMos users should update to PVCAM 3.0.1.2 (Lubomir Walder, Photometrics)
+
** Mightex_C_Cam: Updates (JT Zheng, Mightex)
** [[ThorlabsDCStage]]: See new [[ThorlabsAPTStage]]
+
** NI100X (National Instruments): Add support for hardware-triggered sequencing (Chris Weisiger)
** [[TISCam]]: Support Y16 mode; add white balance red/blue properties (Falk Dettmer)
+
** OpenCVgrabber: update from OpenCV 2.4.8 to 2.4.9 on OS X (Mark Tsuchida)
** [[XCiteLed]]: Fix issue caused by comma in property name (Mark Tsuchida)
+
** PCO_Camera: Fix issue when using software trigger mode with pco.camera (Franz Reitner, PCO)
** [[XIMEA]]: Fix bit depth reported by camera (Egor Zindy)
+
** PI: Fix serial connection issue with certain controllers (Mark Tsuchida)
** [[XLight]]: Fixes and enhancements (Enzo Chiarappa, Crestoptics)
+
** PICAM: Allow use of multiple cameras (Mark Tsuchida)
** [[ZeissCAN]]: Add StepSize property to XYStage (Nico Stuurman)
+
** PVCAM: Fix a crash when enabling Color during Live; fix a possible Snap failure after changing binning and ROI; prevent timeout with slow cameras (Photometrics)
** [[ZeissCAN29]]: Add ND filter wheel support; change condenser position limit from 7 to 8 (Nico Stuurman)
+
** Prior: Fix a communication issue with certain controllers (Mark Tsuchida)
 
+
** Sapphire: Fix a serial communication issue (Mark Tsuchida)
 +
** SpectralLMM5: Add FLICR (PWM) and fiber output selection support (Nico Stuurman)
 +
** StandaStage: Disable limit switch setting causing issues with some setups (Ed Simmons)
 +
** SutterLambda: Add setting for filter wheel timeout (Nico Stuurman)
 +
** XIMEA: Fix crash upon Snap; use camera timestamp resetting only for applicable cameras; add missing GPO port modes for MU USB2 (Marian Zajko, XIMEA)
 +
** Yokogawa CSU22, CSUX, CSUW1: Fix a possible hang; speed no longer a state device (Pariksheet Nanda)
 +
** ZeissCAN: Fix problem while disconnecting when connected by USB (Nico Stuurman)
 +
* New closed-source device adapters
 +
** MightexPolygon: Mightex Polygon multiwavelength patterned illuminators (Mightex)
 
* Updated closed-source device adapters
 
* Updated closed-source device adapters
** [[HamamatsuHam]]: Added support for Defect Correct Mode (Patrick Gregorio, Hamamatsu)
+
** HamamatsuHam: Fix ROI coordinates when binning enabled (Nico Stuurman)
** [[NikonTI]]: No longer crash when loading DiaLamp (remaining bug: config may need to be loaded twice) (Mark Tsuchida)
+
** Olympus: Fix Focus Sensitivity setting (Mark Tsuchida)
 
+
** OlympusIX83: Prevent reporting incorrect stage position immediately after move (Mark Tsuchida)
* Retired device adapters
+
** RaptorEPIX: Add support for OWL640, Ninox and Eagle cameras (David Biggs)
** [[Hamamatsu]] on Windows: Please use HamamatsuHam instead
+
 
+
* Changes to the scripting API
+
** <code>createAcquisition()</code> is deprecated (use <code>openAcquisition()</code>)
+
** <code>getAcquisition()</code>, <code>getAcqDlg()</code>, and <code>getXYPosListDlg()</code> are deprecated
+
** <code>getAcqusitionSettings()</code> (sic.) is now <code>getAcquisitionSettings()</code>
+
** <code>propmtToSaveAcqusition()</code> (sic.) is now <code>promptToSaveAcquisition()</code>
+
** Deleted previously deprecated methods.
+
 
+
* Changes to the MMCore API
+
** Added overloads of <code>getShutterOpen()</code> and <code>setShutterOpen()</code> that take the shutter device label as an argument
+
** Three methods now throw <code>CMMError</code>: <code>definePixelSizeConfig()</code> (two overloaded methods), <code>isPixelSizeConfigDefined()</code>
+
 
+
* Changes to the MMDevice API
+
** None
+
 
+
 
* Changes of interest to developers
 
* Changes of interest to developers
** Micro-Manager 1.4.17 is SVN r13272, 3rdpartypublic r163
+
** Micro-Manager 1.4.22 is SVN trunk r15693, 3rdparty r176.
** The paths from which to load the MMCoreJ_wrap native library and device adapters are now configurable; the default for device adapters is the directory containing the MMCoreJ_wrap or MMCorePy_wrap library (Mark Tsuchida)
+
** All but a few of the Java dependency JARs are now fetched from Maven repositories using Ivy, rather than using the copy in <code>3rdpartypublic/classext</code> (Mark Tsuchida)
** Fixed loading of MMCoreJ_wrap native library when running on Java 7 on OS X (Mark Tsuchida)
+
** Add an <code>unregisterForEvents()</code> method to the <code>gui</code> (<code>ScriptInterface</code>) API (Henry Pinkard)
** Unix build scripts (using GNU build system) have been substantially updated (Mark Tsuchida)
+
** MMCore API changes
** Unix 'make install' can create launch script (Mark Tsuchida)
+
*** Add methods <code>setOriginX(), setOriginY()</code> for XY stages that allow zeroing X and Y independently (Mark Tsuchida)
** MMCorePy built on OS X or Linux is no longer broken (Mark Tsuchida)
+
*** The <code>home()</code> and <code>stop()</code> method now also work with Z/focus stages (where supported) (Mark Tsuchida)
** Mac OS X binaries are now built with Xcode 5.x (previously 3.2) (Mark Tsuchida)
+
*** Add methods <code>setFocusDirection(), getFocusDirection()</code>, allowing to store and retrieve focus stage coorinate polarity where known. Explicitly set values are recorded in hardware configuration file (Mark Tsuchida)
** Mac OS X binaries no longer contain PowerPC support (Mark Tsuchida)
+
*** Add methods <code>getGalvoXMinimum(), getGalvoYMinimum()</code> (Nico Stuurman)
** Visual studio 2010 Debug builds of MMCoreJ_wrap.dll should now work on computers that do not have Visual Studio 2008 installed (Mark Tsuchida)
+
** MMDevice interface changes
** Communication over FTDI USB-serial interface now sends 1 USB packet per message, rather than breaking up messages into bytes (Mark Tsuchida)
+
*** Add optional methods to set X and Y origin separately for XY stages (<code>SetXOrigin()</code> and <code>SetYOrigin()</code>) (Mark Tsuchida)
 +
*** Add optional <code>Home()</code> and <code>Stop()</code> methods to Z/focus stages (Mark Tsuchida)
 +
*** Add optional <code>GetFocusDirection()</code> to Z/focus stages (Mark Tsuchida)
 +
*** Add <code>GetXMinimum(), GetYMinimum()</code> methods to galvo device (Nico Stuurman)
 +
*** The HubID property is now read-only (Nico Stuurman)
 +
* Miscellaneous
 +
** Added a MATLAB script, <code>StartMMStudio.m</code> that configures and starts MMStudio (Windows only) (Mark Tsuchida)
  
  

Latest revision as of 11:40, 12 June 2019

NewLogo.png

μManager™ is a trademark of The Regents of the University of California. Used with Permission.

Micro-Manager versions

Currently, there are 2 usable versions of Micro-manager: 1.4 and 2.0-gamma. These versions use the same code to interface to devices, but differ in their user interface, and file reading/saving code. 2.0-gamma is actively developed and maintained. 1.4 is no longer developed (except for the device support and the ASI diSPIM plugin). If you start using Micro-Manager, it is recommended to use the latest nightly build of 2.0-gamma

(Previous releases)

Nightly Builds

Although there has been no official release for quite some time, further development and multiple bug fixes have occurred in the 1.4 branch in parallel with development of 2.0. Nightly builds are almost always stable and a better choice for most users than the latest official release.

Micro-Manager 1.4.22 (August 14, 2015)

Read the Known Issues.

Requires Windows XP, or 7-10. Windows 7 recommended. Device drivers may have other requirements.

Requires Mac OS X 10.5-10.10. 10.11 (El Capitan) is not yet supported. Device drivers may have other requirements.
(OS X 10.8 and later: if the application does not open when double-clicked for the first time, try ctrl-click or right click, then select "Open".)

Known issues in 1.4.22

  • If you use AndorSDK3 (Andor sCMOS cameras) and experience a crash upon starting Micro-Manager (or loading a hardware configuration), please upgrade to the 20150820 nightly build (Windows 64-bit, Windows 32-bit)
  • Olympus IX83 users: please use 1.4.21 instead.

Changes in 1.4.22 (since 1.4.21)

  • Bugfixes and enhancements in the main application
    • Fix a hang when restarting MDA with data processors installed while Live mode is running (Mark Tsuchida)
    • When adding Z stage devices, the user may now specify the directionality of the stage (whether positive or negative directions move closer to the sample)
    • Fix a bug with storage of user configuration data on Windows 8 and later operating systems (Chris Weisiger)
    • Bugfixes relating to saved data:
      • Fix a minor bug in formatting of metadata in multipage TIFF files (Mark Tsuchida)
      • Fix a bug causing truncation of OME Medatada (Chris Weisiger)
      • Fix a memory leak noticeable when running acquisitions with large position lists (Chris Weisiger)
    • Display bugfixes:
      • Fix a bug causing RGB channels to be swapped when loading files (Chris Weisiger)
      • Fix display of total timepoints in cancelled acquisitions (Chris Weisiger)
    • Fix a bug in behavior of slider controls in European locales (Mark Tsuchida)
    • Fix a NullPointerException when the logfile directory is missing (Mark Tsuchida)
    • Fix a NullPointerException in the Metadata panel (Nico Stuurman)
    • Correctly remember autofocus parameters in preferences (Mark Tsuchida)
    • Enable high-resolution rendering on Macs with Retina Displays
    • Add setting for focus stage coordinate polarity in Hardware Configuration Wizard (Mark Tsuchida)
  • New plugins
    • Mightex Polygon, for controlling the Polygon patterned illuminator devices
  • Updated plugins
    • ASIdiSPIM: numerous bugfixes and improvements (Jon Daniels, Nico Stuurman)
    • Projector: numerous bugfixes and improvements (Jon Daniels, Nico Stuurman)
    • HCS Site Generator
      • Improved acquisition pathing within a well, using a snakelike route (Nico Stuurman)
      • add support for 6- and 12-well plates (Thomas Petebauer, Chris Weisiger)
  • Autofocus plugins
    • Added NullAutofocus, an autofocus method that does nothing, useful in certain complex acquisitions (Mark Tsuchida)
  • New device adapters
    • CNCMicroscope adapters (David Konerding)
      • ArduinoNeoPixel: Adafruit NeoPixel sheild as a shutter
      • RAMPS: RepRap RAMPS/Marlin motor drivers as XY and Z stage
    • Diskovery: Andor Diskovery multi-modal imaging system (Nico Stuurman)
    • Standa8SMC4: An alternative Standa stage adapter using the XIMC motion control library (Eugene Seliverstov)
  • Updated device adapters
    • Andor: Update Andor DLLs; add iXon 888 isolated crop ROIs; support FVB mode; add hardware timestamps on compatible cameras; fix Exposure display (Matthew Milford, Andor)
    • AndorSDK3: Allow fast exposure switching for Snap; allow switching on/off static blemish correction; add shutter control properties (Matthew Milford and Francis McCloy, Andor)
    • AndorShamrock: Add Rayleigh wavelength property; other fixes (Francis McCloy, Andor)
    • ASITiger: Support SetOriginX/Y; updates to scanner and PLogic; hardware sequencing support for piezo (Jon Daniels, ASI)
    • Cobolt: Fix a serial communication issue (Mark Tsuchida)
    • GigECamera: Avoid an error while connecting with some cameras (Mark Tsuchida)
    • IIDC: Add limited/experimental color camera support (Mark Tsuchida)
    • LeicaDMI: Add fixed shutter delay setting (Egor Zindy); fix turret control issues with DMi8 (Mark Tsuchida)
    • Marzhauser: Fix potential serial communication issue (Falk Dettmar, Marzhauser)
    • Mightex_C_Cam: Updates (JT Zheng, Mightex)
    • NI100X (National Instruments): Add support for hardware-triggered sequencing (Chris Weisiger)
    • OpenCVgrabber: update from OpenCV 2.4.8 to 2.4.9 on OS X (Mark Tsuchida)
    • PCO_Camera: Fix issue when using software trigger mode with pco.camera (Franz Reitner, PCO)
    • PI: Fix serial connection issue with certain controllers (Mark Tsuchida)
    • PICAM: Allow use of multiple cameras (Mark Tsuchida)
    • PVCAM: Fix a crash when enabling Color during Live; fix a possible Snap failure after changing binning and ROI; prevent timeout with slow cameras (Photometrics)
    • Prior: Fix a communication issue with certain controllers (Mark Tsuchida)
    • Sapphire: Fix a serial communication issue (Mark Tsuchida)
    • SpectralLMM5: Add FLICR (PWM) and fiber output selection support (Nico Stuurman)
    • StandaStage: Disable limit switch setting causing issues with some setups (Ed Simmons)
    • SutterLambda: Add setting for filter wheel timeout (Nico Stuurman)
    • XIMEA: Fix crash upon Snap; use camera timestamp resetting only for applicable cameras; add missing GPO port modes for MU USB2 (Marian Zajko, XIMEA)
    • Yokogawa CSU22, CSUX, CSUW1: Fix a possible hang; speed no longer a state device (Pariksheet Nanda)
    • ZeissCAN: Fix problem while disconnecting when connected by USB (Nico Stuurman)
  • New closed-source device adapters
    • MightexPolygon: Mightex Polygon multiwavelength patterned illuminators (Mightex)
  • Updated closed-source device adapters
    • HamamatsuHam: Fix ROI coordinates when binning enabled (Nico Stuurman)
    • Olympus: Fix Focus Sensitivity setting (Mark Tsuchida)
    • OlympusIX83: Prevent reporting incorrect stage position immediately after move (Mark Tsuchida)
    • RaptorEPIX: Add support for OWL640, Ninox and Eagle cameras (David Biggs)
  • Changes of interest to developers
    • Micro-Manager 1.4.22 is SVN trunk r15693, 3rdparty r176.
    • All but a few of the Java dependency JARs are now fetched from Maven repositories using Ivy, rather than using the copy in 3rdpartypublic/classext (Mark Tsuchida)
    • Add an unregisterForEvents() method to the gui (ScriptInterface) API (Henry Pinkard)
    • MMCore API changes
      • Add methods setOriginX(), setOriginY() for XY stages that allow zeroing X and Y independently (Mark Tsuchida)
      • The home() and stop() method now also work with Z/focus stages (where supported) (Mark Tsuchida)
      • Add methods setFocusDirection(), getFocusDirection(), allowing to store and retrieve focus stage coorinate polarity where known. Explicitly set values are recorded in hardware configuration file (Mark Tsuchida)
      • Add methods getGalvoXMinimum(), getGalvoYMinimum() (Nico Stuurman)
    • MMDevice interface changes
      • Add optional methods to set X and Y origin separately for XY stages (SetXOrigin() and SetYOrigin()) (Mark Tsuchida)
      • Add optional Home() and Stop() methods to Z/focus stages (Mark Tsuchida)
      • Add optional GetFocusDirection() to Z/focus stages (Mark Tsuchida)
      • Add GetXMinimum(), GetYMinimum() methods to galvo device (Nico Stuurman)
      • The HubID property is now read-only (Nico Stuurman)
  • Miscellaneous
    • Added a MATLAB script, StartMMStudio.m that configures and starts MMStudio (Windows only) (Mark Tsuchida)


(Previous releases)

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact