top bar

BlueboxOptics niji

Revision as of 06:06, 9 April 2018 by Zindy (Talk | contribs)

Summary:Bluebox Optics niji 7 channel LED light source
Author:Egor Zindy
License:BSD
Platforms:All
Devices:[1]
Since Version:1.4.23 20170906
Default serial port settings:
BaudRate 115200
DelayBetweenCharsMs 0
Handshaking Off
Parity None
StopBits 1

The niji is an LED-based solid light source.

Properties

To view or edit the niji properties, open the "Tools" menu and select "Device/Property Browser". The following settings are available:

Read-only parameters

  • AmbientTemp : Ambient temperature inside the enclosure.
  • OutputTemp : temperature sensor located towards the front.
  • Name : niji model name.
  • Description : model description.
  • FirmwareVersion : Firmware version installed on the niji.
  • ErrorCode : Error Code identifier.
  • GlobalStatus : String associated with the error code.

Global parameters

  • State : Global shutter state for the niji (0 or 1).
  • GlobalIntensity : Global intensity value. Multiplied by each channel intensity, it defines the individual intensity values.
  • OutputMode : Either "Constant Current" or "Constant Optical Power".

Channel parameters

  • Channel[1-7]Intensity : Individual intensity value between 0 and 100.
  • Channel[1-7]State : Individual shutter state (0 or 1).

Trigger parameters

  • TriggerLogic : Either "Active High" or "Active Low".
  • TriggerResistor : Either "Pull Up" or "Pull Down".
  • TriggerSource : Either "Internal" or "External".
© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact